What Makes Non-destructive Excavation a Good Alternative?

For a long time, the only methods of excavation used were mechanical and manual. There is no doubt that both methods got the job done but these two also involved safety and damage risks. The mechanical method uses heavy equipment and machines like backhoes, bobcats, diggers, trenchers and the like. These may cause damage when they shake or hit any of the buried assets, utilities and infrastructure. Same is true with manual digging. Hand held tools like shovels and hoes have sharp edges that can cut through cables, wire and lines.

When damage is done on any of these, not only will cost more money for repair but it can also delay the completion of the excavation and can cause discomfort to the people in the property and even within the area.

An alternative excavation method is non-destructive excavation. Just from the name itself, one cansee that it implies that this method does not cause destruction. It is actually a safe and less risky method. Non-destructive excavation is safe and less risky because it uses different equipment and process to make it as such.

Non-destructive excavation has two ways that it can be done. The first one is air vacuum excavation. The main thing used here is air. An excavator truck has special nozzles that produce high powered jets of air to break the ground and loosen the soil materials and other debris. While this is done, another nozzle with industrial strength vacuum sucks out the soil and debris. This is then stored in a special holding tank for easy disposal or for use in back filling. The second way is hydro excavation. The process is basically the same but this time, water is used in place of air. The mud and slurry produced is easily collected and secured for disposal.

Non-destructive excavation is not only safe for the assets and utilities but also safe to use for workers and even for the environment. Because it does not use heavy equipment and machines, there is less possibility of injury to workers. It is also safe for the environment because it causes less noise and air pollution. It also does not destroy the surrounding areas as well as the tree roots.

Using any of the two non-destructive excavation methods will eliminate the possibility of the occurrence gas explosions or leakage due to a burst gas pipe, flooding caused by damage on a water pipe, loss or power caused by cut electric lines and cables. These are just some of the scenarios that can be eliminated when using non-destructive excavation.

So if you want to be assured of the safety of the excavation method you are using, then it is time to look at non-destructive excavation. If you need more information to convince you, then it would be advisable that you go online and do more research. You will find various websites that have the useful information you need. You can even look at the other advantages and benefits of this

Looking for non destructive excavation services? We here at YunzContracting can help. Just visit our site
at www.YunzContracting.com.au to find out more.

What Difference will Contractors see with us of Non-destructive Digging?

There have been many horror stories that most contractors can tell you about the diggings they have done in different projects that they have handled. Usually, they use heavy equipment and machines like bobcats, backhoes, trenchers and diggers. This is what they call mechanical digging. The reason for having horror stories is that these heavy equipment and machines have caused many problems that can escalate into even bigger problems. Some examples of these incidents that cause problems are when a gas pipes gets cut by a trencher. This can cause a gas explosion or leakage. A water pipe can get damaged causing flooding in the area damaging other parts of the property. A power line can get cut which will result to a power outage or even electrocute a worker. These will not only add to the expenses but can also be a cause of delay.

Nowadays, contractors should know that they actually have an alternative method that is safer and less risky. This is called non-destructive digging or NDD. It is precisely called non-destructive digging because it gets the digging job done without the destruction and problems that can be encountered with the use of mechanical digging. This alternative is done using air or water in breaking the ground. These are released in high powered jets to make them strong enough to dig into the hard ground and loosen the soil but still be gentle on any of the buried assets and utilities that they may get in contact with.

Aside from being safe and less risky, contractors will see even more benefits with the use of non- destructive digging. For one, they will have the peace of mind that the job gets done properly, quickly and precisely. The process in non-destructive digging is easier to control as compared to machines. Added to that, the costs are also lower not only because of the fact that it only needs one excavator truck but also because fewer workers are needed in the operations.

In using non-destructive digging, contractors are assured that they can easily do the digging without doing damage to any of the surrounding areas. This method can also be used in roadside projects without having to disrupt traffic or get additional permit for bringing in more heavy equipment.

Another difference that contractors will see is that they can do the job without cutting the roots of trees. This can also be used in confined or tight spaces so they will not have problems of how to fit various machines in a small area.

It is indeed a good idea for contractors to try using any of the non-destructive digging methods so that they themselves can see the difference. They can find out for themselves that this works just as well as mechanical digging and see the advantages and enjoy the benefits at the same time. This will make them see why they should start switching to non-destructive digging and improve the quality of the work that they can do.

Looking for non destructive digging services? We here at YunzContracting can help. Just visit our site at www.YunzContracting.com.au to find out more.

Non-destructive Excavation: The Similarities and Differences Between the Two Ways

Mechanical digging, a conventional digging method may be effective but it is not the most efficient and it can also be destructive. In most areas where digging and excavation works are done, there are usually buried assets and utilities that are located underground. These are not seen and if any one of these get hit by backhoes, diggers or trenchers that are used in mechanical digging, this can mean a big headache for the contractor. Aside from the fact that this will be a cause or the delay in the completion on of the project, there will be additional expenses incurred for the repair of the damage.

Non-destructive excavation is an alternative that can be used. This is a safer and less risky way of excavating the ground. The risks of damaging any of the wire, cables, pipes and lines can be minimized if not avoided. This means that the excavation can be done quickly and properly. there is less worries for the safety of the workers and the people in the area as well. You can just imagine the problems that some of these damages can cause like a burst gas pipe, broken water pipe or a cut electric line. It can also be an inconvenience to many people, some of whom may even try to stop the continuation of the work.  Non-destructive excavation has two ways and these are hydro excavation and air vacuum excavation.

In Hydro excavation, high pressure water is used to break the ground into smaller pieces which the vacuum nozzle then sucks out to store in the holding tank. On the other hand, air vacuum excavation uses high pressure air to break the ground and loosen the soil material. The similarities between these two ways are:

• they basically follow the same process, from breaking the ground until it is vacuumed out to a holding tank for quick disposal
• they use the same equipment which is an excavator truck
• they have similar uses like construction and other industry needs
• can both be used offsite just by extending the nozzles or hoses
• they are both environmentally friendly
• both are cost effective and saves time

the main differences between the two ways of non-destructive excavation are:

• air vacuum excavation cannot be used on frozen ground while using hot water in hydro excavation makes this possible
• hydro excavation can be used in almost all types of soil while air vacuum excavation is limited
• hydro excavation creates mud and slurry while in air vacuum excavation, the soil remains dry which makes it still usable for back filling needs
• hydro excavation can cause flooding while air vacuum excavation can make a dusty environment

Although these two ways on non-destructive excavation can have these similarities and differences, they are both beneficial. Depending on the area and its needs, a company that provides these services can recommend what way will work best. It is best to try any of the two ways to make sure that there will be less risks involved and to avoid the occurrence of even bigger and more costly problems.

Looking for non destructive excavation ? We here at YunzContracting can help. Just visit our site at www.YunzContracting.com.au to find out more.

The Benefits of Air Vacuum Excavation as one method Non-destructive Digging

There are many methods that contractors employ in the excavation jobs that are needed in the many projects that they handle. This can be one the most crucial parts of the whole process because buried underground are different important assets and utilities and even infrastructures that can get damaged it the excavation is not done properly or when a tool or equipment gets in contact with these. Mechanical excavation is the most common method used but it can be destructive because it uses heavy equipment and machines that can cut or break the important things that are in the area where the excavation is done.

There are non-destructive excavation alternatives though that can be employed to prevent these damages. It is called non-destructive excavation because it is safe and less risky as compared to mechanical digging and other conventional excavation methods. One of method that is popularly used is air vacuum excavation. This process is uses strong jets of air to break the ground. This also loosens the soil material and debris which is then vacuumed out by a special nozzle. The soil and debris are stored in a holding tank which can be disposed right away or used for any back filling needs. This just uses one excavator truck where are the tools and machines are.

Air vacuum excavation as a method of non-destructive excavation can offer many benefits that will be very helpful to everyone involved in the construction, most especially to contractors who head the projects.

The benefits are:

• The excavation can be done in a shorter period of time which saves contractors for costs of labour, downtime and fuel. This helps lower down the overall costs.
• The job is done precisely which means there will be no need for back jobs.
• Air is free and everywhere which means it can be used anytime and in any area.
• It does not cause damage to the surroundings where the excavation is done.
• It is safe for the workers.
• It is environmentally safe because it does not cut into tree roots.
• It can be used off site in sensitive areas or in those places that are difficult to access because the nozzle can be extended.
• It can create smaller holes which are easier you work with.
• Contractors will have the peace of mind that no assets, utilities and infrastructures would be damaged which means there will be no untoward incidents or additional expenses needed for repairs,

These benefits will make air vacuum excavation a better alternative. Non-destructive excavation is important and its different methods are what can make the jobs of contractors easier. They have fewer worries not only about the project but also for the safety of the workers and the people in the surrounding areas.

Air vacuum excavation is just one of the methods of non-destructive excavation. There is another method which can be used just in case the air vacuum excavation will not work on the particular type of soil.

Looking for non destructive excavation? We here at YunzContracting can help. Just visit our site at http://www.YunzContracting.com.au to find out more.

 

The Two ways of doing Non-destructive Digging

Non-destructive digging is a relatively new digging method. It is not as popular as the conventional ways of digging mainly because not a lot of people know about it. What they are used to using are the conventional ways of digging which are the mechanical and manual. These can be considered destructive digging method, mechanical more so than manual. Non-destructive digging is a safer and more efficient alternative and compared to these two ways.

Mechanical digging uses various machines and heavy equipment with each one having its own function. Examples of these are backhoes, bobcats, trenchers and diggers. Yes, these can do the job of digging but while doing this, the infrastructure, assets and utilities that are buried underground can get damaged and in turn can cause even bigger problems. Although manual digging uses hand held tools, these can still get i contact with the pipes, lines or cables that can get cut. Manual digging also requires a bigger labour force and the job takes longer to finish. The risks involved in these conventional diggings have so many effects that can be result to bad things like flooding due to burst water pipes, loss of power from an electric line getting cut or a gas explosion caused by a damaged gas pipe.

Non-destructive digging on the other hand minimizes the risks of these destruction and damages from occurring. This digging method can be done in two ways. Hydro excavation and air vacuum excavation. Each has its own and advantages and disadvantages.

Hydro excavation is a way of doing non-destructive digging that uses high powered jets of water that is directed on the area where the hole will be made. The water is strong enough to break the ground and slowly loosen the soil material and other debris. The excess water and slurry are simultaneously vacuumed out to be stored in a holding tank. This is for easier handling and disposal. The advantages of hydro excavation are one it can be used on almost all types of soil. Two, it can be used on frozen ground. Hot water is used to melt the ice. The disadvantages to this way are that it can get messy because water and mud can overflow. It needs a lot of water and it can be difficult to find a water source in some areas.

Air vacuum excavation basically works the same way as hydro excavation. In this way though, high powered jets of air is used instead of water. Once the soil is broken through and loosened, the vacuum takes out the soil, rocks and other debris and stores it inside the holding tank. The advantages of air vacuum excavation are it is cheaper than hydro excavation because air is free. Air is also readily available anywhere. The excavated soil is readily available for use as back fill. The disadvantages are it cannot be used on all soil types. It cannot be used on frozen ground because it is not strong enough to break the ice.

This non-destructive digging can have many advantages that everyone can benefit from.

 

Looking for non destructive digging services? We here at YunzContracting can help. Just visit our site at YunzContracting.com.au to find out more.

 

Basic Facts about Non-destructive Excavation and its Benefits

The development in technology has made it possible for new methods of digging to be developed. Gone are the days when the only choices for excavation and digging are either the mechanical method or the manual method. Although these methods have gotten the job done, there are certain that can happen. There have been many horrors coming from the personal experiences of contractors who handle these projects. Because machines, heavy equipment and hand held tools can cause damage to the buried assets and utilities, many problems have been encountered. Examples of these are broken sewer systems, loss of power due to an electricity line getting cut and so much more.

Non-destructive excavation is a method that was developed as an answer to these problems. Now there is a method that is safe and less risky. The risks of causing damage to any of the utilities and assets in the area where the excavation is done is minimized or even eliminated. Non-destructive excavation does not use heavy equipment and tools that can cut or damage any of the lines, pipes or even infrastructure. One of the reasons why this method is safe is because if the fact the ways that it can be done uses either water or air. These components are what make non-destructive excavation safe.

Hydro excavation and Air vacuum excavation are the two ways that non-destructive excavation can be achieved. High powered jets of water or air are used to dig the hole and loosen the soil underneath. While this is being done, the excess water, soil, mud and debris are simultaneously vacuumed out and stored in a holding tank. This whole process can be done just using one excavator truck. The materials in the holding tank will be easier to dispose or use for back fill.

 

There are several benefits to using non-destructive excavation method for any of the excavation of digging needs that one may have. These are:

 

• The costs involved are smaller because of the fact that this does not need to use many machines and equipment. Also it requires less labour which means fewer workers to be paid for their services.
• This can be used in sensitive areas like flammable factories or refineries.
• Using this method leaves the surrounding area intact and without damage.
• This can be used offsite if the area is sensitive to weight. A long hose can be used to do the excavation off site.
• It is gentle on the environment. It has less air pollution and protects tree roots from getting cut.
• This can be used in small spaces or even in roadside projects without interrupting the flow of traffic.
• It saves time and without causing problems, the projects can be done on time if not earlier even.

It is good to know all these things about the non-destructive excavation method because it is a great alternative to the conventional digging methods. It has many benefits not only for those involved in the construction projects but also for the environment as well.

Looking for non destructive digging services? We here at YunzContracting can help. Just visit our site at non-destructive excavation to find out more.

 

Important Things to Know about Non-destructive Digging

 

The mechanical digging which is the most common digging method being used these days can be considered destructive digging. This is so because there is already the existence of the non-destructive digging method. In doing the mechanical digging process, heavy equipment and machines need to be used and not just one but multiple machines because each one will have a specific function. Examples of these are trenchers, backhoes, bobcats and drills. The use of these is what makes the process destructive. These heavy equipment and machines can easily cause damage to the underlying assets and utilities that it may get in contact with. This will then result to more problems like flooding because of a water pipe that gets damaged, loss of power from a cut electric cable or explosion from a leaking gas pipe.

An alternative to avoid these risks that can have every bad results, non-destructive digging method or NDD was developed. This method of digging safely and quickly exposes underground infrastructure to avoid accidents. Non-destructive digging can be done in two ways these are hydro excavation and air vacuum excavation. Either one can be used depending on what is applicable in the area where the digging will be done.

Hydro excavation is done using water and vacuum. An excavator truck has a nozzle that jets out high pressure water to break the ground. The soil material and other debris are then loosened. Water, soil and debris turn into slurry which is then vacuumed out into a holding tank where it will be stored until it is ready for disposal. Air vacuum excavation on the other hand uses water and vacuum as well. The process is basically the same; the difference is that high pressure air is used instead of water. The result is dry soil and debris which when stored in the holding tank can readily be used as back filling if needed.

 

Non-destructive digging has several advantages that it can offer to people who use it as an alternative digging method. These are:

 

• this method is safe for workers
• requires less labour
• eliminated need for back job because the digging in precise and accurate
• costs to have this done are lower
• does not affect or damage surrounding areas
• gentle on the environment because it causes less air and noise pollution
• can be used on sensitive areas like a protected ecosystem
• can be used offsite
• can be used in small areas or roadside without disrupting traffic

Non-destructive digging  can also be used for different thing not just for construction. This method can also be used for potholing or day lighting, slot trenching, removal of debris, exposing utilities, excavation of piling holes, cold weather digging and remote digging. If the soil in the area where the digging is done is contaminated, this is also an ideal method to use because it can be transported and disposed without exposing it to anyone.

The more that people know about non-destructive digging, the more they will be able to see how much better it is compared to mechanical digging. It is not only a safe method for people, utilities and assets but also for the environment which we need to take care of as well.

Looking for non destructive digging services? We here at YunzContracting can help. Just visit our site at www.YunzContracting.com.au to find out more.

 

 

 

 

What makes Non-destructive Excavation Special?

We may think that any excavation is just that, an excavation. But what most of us do not know is that there are many problems that can be caused by excavation and digging. Mechanical digging and excavation uses heavy equipment and machines like backhoes, trenchers, drills and the like. These can cause problems when they do damage to any of the assets or utilities that are buried underground. Examples of these are gas leaks from broken gas pipes, flooding from burst water pipes or electrocution or loss of power from damaged electric cables. Mechanical digging and excavation can then be referred to as destructive digging.

A better alternative to this is non-destructive excavation. Just from the name itself, non-destructive excavation is a safe way of excavation and digging. The tools used in this excavation method are not destructive. It avoids the risks of hitting important assets and utilities that can have disastrous results. It can be a safety issue as well as expensive. Repairs on the damages it can cost will not only be expensive, it can cause delays on the project. Two ways that non-destructive

There are two ways that non-destructive excavation can be performed. These are hydro excavation and air vacuum excavation. These use either high pressured jets of water or air to break the ground and loosen the soil. The excavated soil and debris are then vacuumed out using a special nozzle and stored in a holding tank for easily disposal.  Instead of machines that can have sharp edges, water and air can be powerful enough to do the digging and excavation and still be gentle on the web of wires and cables that it may get into contact with.

 

Here are the advantages of non-destructive excavation that makes it special:

 

• safe and spark free excavation in sensitive areas that are prone to explosions or fire
• minimal or no damage to surrounding areas
• can be used in small spaces or confined areas
• can be used in roadside projects without stopping traffic and damaging the pavement
• the process is more precise which means the job can be done in less time and will not require back jobs
• more efficient method of removing soil and other debris
• does not require too many workers and machines
• produces less noise and air pollution
• safe for the environment because even tree roots can be protected from damage
• if the soil is contaminated, using this method makes it possible for it to be taken out and disposed without getting touched by human hands or exposed
• costs less than mechanical digging

These advantages of non-destructive excavation  are what make this method special. It can do all the functions of mechanical digging and more. The safety of the people is not the only thing that is important but that of the environment as well. These advantages bring about benefits to everyone involved in the project. Non-destructive excavation is not only used in construction but in other industries as well. Non-destructive excavation is indeed a better alternative that more people should start using over mechanical digging.

Looking for non destructive digging services? We here at YunzContracting can help. Just visit our site at www.YunzContracting.com.au to find out more.

 

 

 

 

 

Is Non-destructive Excavation a Practical Choice?

In many things that we do, we always try to look for ways to makes things faster, easier and of course cheaper. This does not mean though that we want to compromise quality. For example, if there is any construction, repair or just any digging and excavation needs, we all want to look for a way to get this done the right way. There are three main choices to choose from as methods of excavating and digging the ground. These are mechanical, manual and non-destructive excavation methods.

First two methods are known as the traditional digging methods. Mechanical digging methods involve the use of machines and heavy equipment like backhoes, bobcats, trenchers, drillers and the like. These are needed because each machine or equipment has a specific. This effectively does the job although it can be expensive and can even do some damage on the buried assets and utilities in the area where the digging or excavation is done. Manual digging on the other hand uses hand help tools like shovels and hoes. This is not really recommended for bigger projects because this may take not only a lot of workers but it will take them a long time to finish. Although it can be safer for the buried assets and utilities because it can be more controlled, the sharp tools can still cause damage.

Non-destructive excavation is not really a new method but it has not really been utilized by a lot of people. It is not as popular as the two traditional digging methods. But people should know that non-destructive excavation, also known as vacuum excavation is a more practical choice.

First of all, it is safe. As its name suggests, it does not leave destruction behind while doing the digging and excavation. It uses either high pressure water or air to break the ground and loosen the soil. These will not damage the electric cables, gas pipes, water pipes and sewers just to name a few of the buried assets and utilities. This prevents accidents caused by these damages.

Second, non-destructive excavation method is more precise. This means that the job is done quickly and without added costs when back jobs will be required as with the traditional methods.

Third, non-destructive excavation is more cost efficient. It needs only one excavator truck and a couple of workers to operate the whole thing. This saves on costs by not requiring too much gas and labour.

Fourth, non-destructive excavation is more environment friendly. It causes less noise and air pollution. The roots of trees and other shrubs around the area can be safe from getting damaged.

If you compare all three methods, you will see that non-destructive excavation is indeed a better alternative. If you want to be practical, then you should seriously try to consider this method for your next project. You will see how different it is and how useful its practical benefits are.

You can go online and check out different websites that feature non-destructive excavation and the ways it is done. You will also find company websites that offer services. You may even ask for price quotation or estimate so you have an idea of how much it will cost.

Looking for non destructive digging services? We here at YunzContracting can help. Just visit our site at www.YunzContracting.com.au to find out more.

 

The Process of Non-destructive Digging and its Benefits

The process that is done to do diggings and excavations may sometimes come with dangers and risks. This is especially true with the use of mechanical and manual digging. These two processes use machines, equipment and tools that can cause problems when they accidentally hit buried assets and utilities in the area. There have been many horror stories of the problems encountered when any of the two processes cause damage. To avoid this, non-destructive digging process can be an alternative.

Non-destructive digging is a safe process of digging and excavating soil in an area without causing damage to those assets and utilities underground. It safely does the job without risking any problems like gas leaks from broken gas pipes, flooding from a water pipe that gets damaged or power outage or electrocution caused by a cut electric cable. Other assets and utilities that are safe when non-destructive digging process is used are telecommunication lines, sewer systems and the like.

There are two methods that can be used in non-destructive digging. These are air vacuum excavation and hydro excavation. For these instead of using shovels, trenchers or backhoes, high pressure air or water is used to break the ground. This also loosens the soil material and other debris. A vacuum nozzle simultaneously sucks out all excess soil, slurry and rocks and store these in a special holding tank. These methods are strong enough to do the job yet gentle on the on the assets and utilities and the surroundings.

Other than the safety benefit that non-destructive digging has, there are additional benefits to this process. These are:

• This can be used in small areas or tight spaces. It can also be used roadside digging projects without disrupting the flow of traffic.
• It effectively utilizes manpower because it only requires a couple of people to operate.
• It is cost efficient. It does not cost as much as when using mechanical digging methods. It requires less labour and uses less energy like gasoline for the equipment and machines.
• The job gets done faster because it is more precise. It hardly needs any back job. Also, since there is a holding tank, disposal is easy. Back fill material is also readily available if needed.
• This process causes less pollution, namely noise pollution and air pollution.
• It is safer for the environment since it does not cause damage to the surroundings as well as on the roots of trees.

The non-destructive digging method has indeed been a welcome addition to the processes that can be used for diggings and excavations. It gives contractors, owners and workers the peace of mind that they can go on with the project without worrying too much about safety. They also do not need to be bothered with the costs that can be incurred for the repairs on cases any damage are done.

There are many companies these days that offer any of the two non-destructive digging methods. You can look for these companies online so you can inquire about their services.

Looking for non destructive digging services? We here at Yunz Contracting can help. Just visit our site to find out more.